Quantcast
Channel: Dialogic PowerMedia HMP GlobalCall and R4 API - Recent Threads
Browsing all 1151 articles
Browse latest View live

RE: Adding a WWW-Authentication header to SIP REGISTER request

Thanks, that explanation helps a lot. Based on your advice I tried modifying my gc_SetAuthenticationInfo() call and think I found a solution.I was setting the "realm" in the IP_AUTHENTICATION passed to...

View Article


RE: Adding a WWW-Authentication header to SIP REGISTER request

Great! I'm glad it's working now. Thank you for letting me know your solution

View Article


Adding a WWW-Authentication header to SIP REGISTER request

Hi,I have an application that registers as a client with a SIP server using HMP Windows 3.0. On the first SIP REGISTER message I send, I receiver a 401 Unauthorized response. Section 4.28 of the Global...

View Article

RE: HMP 4.1: how to record voice from IP?

Hi Leonid,Finally I found the RTF configuration file is under c:\ProgramData\Dialogic\HMP\cfg on Windows 2008 platform, I have changed the file according to your suggestions, attached you'll find the...

View Article

RE: BSOD DRIVER_IRQL_NOT_LESS_OR_EQUAL dlgcmcd.sys

same probolm :-(

View Article


BSOD DRIVER_IRQL_NOT_LESS_OR_EQUAL dlgcmcd.sys

Hi,We are great need of any assistance in troubleshooting a BSOD on a newly built server with dialogic PCI cardsSystem specs:Server H/W: Xeon H3-Skt Serverboard ATX, Intel C222, Intel Xeon E3-1231v3,...

View Article

RE: BSOD DRIVER_IRQL_NOT_LESS_OR_EQUAL dlgcmcd.sys

How to FIX DRIVER_IRQL_NOT_LESS_OR_EQUAL – 0x000000D1 Error ?

View Article

RE: Rest Line

Hi there,Could you please provide more details on the issue. What is happening when the E1-2 goes to "rest", in telephony terms? What protocol is used: PRI ISDN or CAS/R2? What component is logging...

View Article


RE: HMP 4.1: how to record voice from IP?

The logs look good, except for the recorder, some odd values returning from write callbacks. Please repeat the test with the attached version (I removed UIO from there) and for the player pass...

View Article


RE: HMP 4.1: how to record voice from IP?

Here is smaller version, in a case the previous one did not pass through (I removed the long PCM file)

View Article

RE: BSOD DRIVER_IRQL_NOT_LESS_OR_EQUAL dlgcmcd.sys

Hi, we have since solved the problem by chaning to a (Dell 1U) server that uses a pci-x (Magma HOST card) card intstead of regular pci card for communication with the magma expansion chassi.

View Article

RE: Rest Line

Thanks sirWe use ISDN/PRI euro     event type is =0832    DMV600BTEP     DM3  I monitor Lineadmin    the signal for line 2 some time green when Rest the line it changes to Red or Yellow    I fllow the...

View Article

RE: Rest Line

It looks like the alarms come from the switch or carrier; DMV board don't have any timer set to disconnect the line each 4 min. Do you have CSU between DMV and the carrier? I'd suggest to swap the...

View Article


RE: Increasing delay (1 ore more seconds) in SIP audio stream

Ok, so a user agent is being hairpinned to another call leg?  Thus the two IPM channels are routed in full duplex mode?Which side is seeing delay, and how long?   Have you checked a wireshark trace to...

View Article

RE: Increasing delay (1 ore more seconds) in SIP audio stream

This issue is also handled under: C163480 - Dialogic support requestCan you get your info from there?

View Article


RE: Increasing delay (1 ore more seconds) in SIP audio stream

yes, two call are connected to each other. yes, full duplex.  I have a picture of the audio from the long connected agent to the other call. (2 seconds delay)  We made a network trace to make de delay...

View Article

Rest Line

Dear All,I am using SR 6.0 with DM3 and Windows 2003 server.I have V600BTEP PCI Board and our Lines  are 2 E1Our's  is IVR InBound call application is working finebut after each 15 Minutes line 2 E1...

View Article


RE: Rest Line

ThanksI have 2 Modem with PRIfirst one Schmid it's good and running oksecond one not Schmid it's for Line 2The signal for First one Excellent > The Light ok.Second One The light Run and OffYour...

View Article

RE: how to listen dialogic card installed PC surrounding sounds

Well, yes, it is possible. Not too simple, though. The card itself can only record or stream audio from POTS telephony line, you can't plug a microphone to it without additional hardware (like phone...

View Article

how to listen dialogic card installed PC surrounding sounds

Dear All ,I decided to write and test an app for remote listening dialogic card installed PC surrounding sounds .It may be useful for control places remotely .I have a D4PCIUFW 4 analog line card .Is...

View Article
Browsing all 1151 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>