RE: DCM not detecting HMP_SOFTWARE on Windows 2012
Refer to section 4.3.2 of the GlobalCall IP Technology guide:www.dialogic.com/.../globalcall_for_ip_hmp_v12.pdfJeff
View ArticleRE: IPERR_TXRXRESOURCESINSUFF on gwAnswerCall
Are you sure you have the correct licensed related pcd file selected in DCM to be download by the HMP device?What is the number of ports in your license, for IP and RTP?Jeff
View ArticleRE: IPERR_TXRXRESOURCESINSUFF on gwAnswerCall
We have two 10 channel licenses and a 4 channel license for our testing.My dev computer is using one of the 10 channel licenses and everything works there. Someone in our company issued it for my Mac...
View ArticleRE: IPERR_TXRXRESOURCESINSUFF on gwAnswerCall
In order to distinguish the license files themselves, they should each have a unique name. They will also have the MAC address listed as part of the string inside the file itself on one of the lines.Do...
View ArticleMigrating from ISDN to SIP, C++ to .Net
I am migrating a VC++ 6 voice server application (Windows), which is using HMP 3.0 API and ISDN infrastructure, into a .Net application. The main purpose of migration is replacing ISDN calls with a SIP...
View ArticleRE: IPERR_TXRXRESOURCESINSUFF on gwAnswerCall
They activate correctly, I see 10 channels and when registered as extensions to the PBX I can take multiple calls simultaneously, so I think I am allowed to use the 10 channels.What is odd, is that...
View ArticleRE: ipm_Listen synchronization object timeout
How many ports is licensed for this system? Also, is this seen only under a certain load or can happen with very few calls (if so for either how many)?It appears there could be some breakdown in...
View ArticleRE: The demo have not received Unbolock event
Looks like both RED alarm and LOS are being received from remote side. Ideally since this is HMP/DNI you should really have the following line in gc_basic_call_model.cfg:dtiB1T1 DM3 In...
View ArticleRE: IPERR_TXRXRESOURCESINSUFF on gwAnswerCall
Are all 10 channels waiting for a call at the application level when you place the second call? Also what is being offered at the SDP for that incoming call in this case? If could be that codec is not...
View ArticleRE: ipm_Listen synchronization object timeout
770 ports. Happens with a very few calls right after boot. Progressing in time though (more and more channels will become unusable). After another reboot and for N-next ones all is fine regardless of...
View ArticleRE: ipm_Listen synchronization object timeout
Ok, to clarify is this seen mainly during application initialization or during calls (run-time)?It should be ok to have everything asynchronous. I don't recall if there is any similar known issues in...
View ArticleRE: ipm_Listen synchronization object timeout
multy-threaded, 1 worker for events, each calling channel in single thread. That error appears during runtime. 1-20 mins later after 1st call being made.On this SU I never fall into this issue with...
View Articleipm_Listen synchronization object timeout
Hello.Using HMP 3.0 SU361 on Windows 2008 R2.After reboot having the following issue: 05/05/2016 09:36:34.325 6060 10020 libipm_ipvsc EXCE Ipmedialib ipmB1C261...
View ArticleRE: IPERR_TXRXRESOURCESINSUFF on gwAnswerCall
All 10 channels are initially listening for calls, I am calling gc_waitcall() after the line device reset event has been received for each line device. I am not doing anything to "relisten" after the...
View ArticleRE: The demo have not received Unbolock event
Thanks for replay, I have received Unbolock event now, as we configure PABX for ISDN protocol, Then it is fine now.The log as below:05/06 11:53:23.047 [GC_APICALL]:...
View ArticleRE: user to user message
Hi Leonid, I have install DNI310TEPE2HMP board and ISDN protocol, I want send UU IE message, i use gc_SetInfoElem before make call, The telephone is ringing, but no text message on telephone, The...
View ArticleRE: The demo have not received Unbolock event
The example for the API call itself should be good enough for you to use as I did it myself long ago (in the past). www.dialogic.com/.../globalcall_api_v8.pdfPage 330.Make sure in IE_BLK you specify...
View Articleuser to user message
hi at all,i work with dialogic sr511.i have connected 2 systems via crosscable and everything works finenow and i want to send a user message from sys1 to sys2 within the setup message so that sys2 can...
View ArticleRE: user to user message
See reply on your other thread:www.dialogic.com/.../13280.aspx
View ArticleRE: The demo have not received Unbolock event
Thanks Jeff.I have already do as you say, The PABX config as T1 -B8ZS,ESF ANSI. The log have not show any error , but still have not text message in telephone.Please you help me see the below code://...
View Article