RE: HMP Linux 4.1 performance and benchmark
Hi Roberto,Please see Release Update (www.dialogic.com/.../release_update.pdf) section "1.51.1 Configuration and Performance Recommendations" and it has minimum recommended system spec for high-density...
View ArticleClik here to view.
RE: Dialogic improperly handles the second INVITE
Thanks Leonid, everything is fine now, faxes are received properly!Now I decided to look through other rtflog errors and warnings and found that most of them I cannot understand e.g.08/05/2016...
View ArticleRE: Dialogic improperly handles the second INVITE
Don't worry about that. Those are not errors per se, this is just a way the app initializes resources. For example, "Setting Max Subscription to 0" simply means that the app does not set a number of...
View ArticleSR140 v6.4 ECM???
Can anyone tell me where I can find out if ECM is enabled in the the BrookTrout Configuration Tool. I have a BrookTrout SR140 v 6.4.0 and would like to see if this is turned on or not, but can't find...
View ArticleClik here to view.
RE: Dialogic improperly handles the second INVITE
Everything is fine, faxes are now received properly. Thanks Leonid!I decided to search through rtflogs (I attached them) and found some errors and warnings I don't quite understand, could you help me...
View ArticleRE: Dialogic improperly handles the second INVITE
Ok, Leonid, got it, thank you very much for clearing that up!
View ArticleRE: D120JCT-LS IS NOT WORKING
>>>> I am using 2 analogic lines, Line 1 use the pin 3(-) and pin 4(+), Line 2 use the pin 2 (+) and pin 5 (-).what you mean by pin3 , pin4 ..... ?all you have to do is connect a...
View ArticleRE: Dialogic D120JCTLSU and D120JCLSW Difference?
Hello Edwin,D120LSW does not exist as a model name, and most likely refers older D120-LS models, like non-JCT ISA boards. Let.s forget about that, it is long time retired productD120JCT series are...
View ArticleRE: D120JCT-LS IS NOT WORKING
Thanks for your answer, the problem was fixed in a %50, first, i cleaned the contacts of the board, and it works just like you said, but with a RJ14 connector using the RJ11 standard, but this board,...
View ArticleRE: Dialogic D120JCTLSU and D120JCLSW Difference?
Dear Leonid,Thank you for your answer, I will check the links.I have to correct the second board model , I missed a JCT .So the question is :What is the difference between "Dialogic D120JCTLSU" and...
View ArticleRE: D120JCT-LS IS NOT WORKING
Ok I see.dont use RJ14 , Just use RJ11 socket , pin 1,4 is one line , pin 2,3 is another lineie. RJ11 has four pins , two middle pins are one line , two side pins are second line.
View ArticleRE: Dialogic D120JCTLSU and D120JCLSW Difference?
Edwin,From API point of view and feature-wise those boards are identical. The difference is a form factor. LS-U boards have PCI Universal interface, while LS-W series is PCI Express-based.
View ArticleRE: Dialogic D120JCTLSU and D120JCLSW Difference?
Leonid,Thank you , your one line sentence saved me.
View ArticleDialogic D120JCTLSU and D120JCLSW Difference?
What is the difference between Dialogic D120JCTLSU and Dialogic D120LSW ? Does the D120JCTLSU work with System Release 6 ?
View ArticleHow to disable/enable CRC in SR6 version vista (64bit)?
I have an E1(PRI) line connected to Dialogic D6001E1.In older releases of SR6 (windows XP/Windows server2003) I used to disable/enable CRC in CTR4.prm file.but in SR6 new release (vista) for (windows...
View ArticleRE: How to disable/enable CRC in SR6 version vista (64bit)?
Hi Edwin,The PRM files are still there, but in Windows 7/2008 those files, by default, are inctalled in C:\ProgramData\Dialogic\data folder/ The ProgramData folder is hidden by default, so you will...
View ArticleRE: Authentication for Outbound Calls
Hi Michael,Yes, that's correct, if the UAS requires authentication, the firs INVITE from UAC (going out without authentication fields in headers) is challenged with 401 or 407, where UAS specifies its...
View ArticleRE: Authentication for Outbound Calls
Hi Leonid, Thanks for your quick reply on this. I realised that in the case of the specific UAS that I’m attempting to integrate with, I do not require the sending of the REGISTER message. I’ve removed...
View ArticleAuthentication for Outbound Calls
Hi,I’m currently looking at making outbound calls from my HMP 4.1 system (running on 64-bit RHEL 7.1) and I can successfully dial numbers where there is no need for authentication. I’m testing against...
View ArticleTrack when the Call is Terminated by Caller - D4PCI
Hi I am developing an IVRS solutions in VC++ 6.0 (using c language). I am facing one problem, needs a solution (thanks).-- When caller calls on my IVRS application, it starts playing IVRS playback...
View Article