RE: SIP: How to set default codecs for OPTIONS response
Ok, like I stated before if you have only a-law (8) or mu-law (0) set then the output you see in the 200ok SDP is correct:v=0o=Dialogic_SIP_CCLIB 0 1 IN IP4 172.18.180.10s=Dialogic_SIP_CCLIBi=session...
View ArticleRE: HMP 3.0 Win GSM codec Support?
I take it by GSM you are referring to G.722 in this case? If so, then that requires a separate license feature which needs to be added in this case.Jeff
View ArticleRE: SIP: How to set default codecs for OPTIONS response
Yes that output is what we get when we let the GC library to handle OPTIONS request. As soon as we switch the handling to our custom implementation we get thisDevice: [DEVICE: iptB1]gcValue: 44; gcMsg:...
View ArticleRE: SIP: How to set default codecs for OPTIONS response
Hello Jeff,So what do you think about our implementation of the custom OPTIONS handler? Is there any error in the code?Best Regards.
View ArticleRE: SIP: How to set default codecs for OPTIONS response
Generally speaking in order to modify the outgoing SDP content for SIP messages the application must be build and running in 3PCC mode. See chapter 5...
View ArticleRE: HMP 3.0 SU375 and ssp.mlm.sys bugcheck 0x000000d1
Yes, if you need more information on handling of SUBSCRIBE refer to section 4.17 here:www.dialogic.com/.../globalcall_for_ip_hmp_v12.pdfThis will help clean-up the underlying call failures since there...
View ArticleRE: License Activation Failure
Similar to prior reply make sure recommendation in Sections 2.5 - 2.8 of the hmp4.1 software installation guide are set correctly on this system.www.dialogic.com/.../release_install.pdfJeff
View ArticleRE: SIP: How to set default codecs for OPTIONS response
Hi Jeff,We think we've finally got what you're meaning. In the Media Announcement attribute "m=audio 49152 RTP/AVP 0 8", the last figures list simply means codes specifying codecs, i.e. 0-g711 pcmu,...
View ArticleRE: SIP: How to set default codecs for OPTIONS response
Yes, that is correct. Btw, not sure what happened to the link but it was chapter 6 of rfc4566 for SDP.Jeff
View ArticleRE: Serial number of HMP virtual device
HI,This was just an arbitrary value which was populated to maintain consistency of the property sheet across the DNI and HMP devices. Its not actually used in this case.Jeff
View ArticleClik here to view.
Serial number of HMP virtual device
Being that HMP does not rely on physical hardware, where does its serial number come from?Where is the serial number stored?Thanks.
View ArticleRE: Serial number of HMP virtual device
Ok,Where is "SerialNumber" stored?How can I change it?Thanks.
View ArticleUse Fax on D/600 JCT
I use fx_open() to open fax device on D/600 JCT2E1 PCIe with channelname 'dxxxB1C1'but it fails. how can I open fax Device on D/600 and how to get fax channelname if it differs with voice channelname.
View ArticleRE: Serial number of HMP virtual device
Why do you ask, is there some issue here? You cant change that as it generated at the driver level. Jeff
View ArticleRE: Open Fax Device on D/600 JCT
Here is some information which may help:www.dialogic.com/.../jctAlso, note you need to make sure the board is downloading fax based fwl.Jeff
View ArticleOpen Fax Device on D/600 JCT
I am using fx_open() to open fax device on D/600 with channelname = dxxxB1C1But it failes. what is channel name for fax device and how can I get fax channelnames.
View ArticleRE: Open Fax Device on D/600 JCT
Thanks Jeff, I read the post but I have another problem.I set Interface to CTR4 and FirmwareFile to spfax.fwl but the DCM does not start. when I change FirmwareFile to Default it starts.I found this...
View ArticleRE: Serial number of HMP virtual device
Yes,The dialogic serial number was hard coded into some old software, and now the software won't work on a new server because it has a different dialogic serial number.Can you sell me a "patch" that...
View ArticleRE: Open Fax Device on D/600 JCT
I do know that there was a restriction where CSP fwl could not be downloaded on the same span as ISDN on the dual span JCT boards. I guess the same could apply to fax fwl as well. I guess this is the...
View ArticleRE: Serial number of HMP virtual device
What O/S version and HMP SU are you seeing this on? I believe there should still be a number there, as I checked on latest build from two systems and it was ok.Jeff
View Article