RE: TF_SETINIT initial silence detection not working
Switched over to ec_stream code.. Everything worked the first time.
View ArticleRE: Hmp win 3.0 on Azure cloud server?
Hi,Just wanted to add a clarification that there has not been any official testing for the Cloud with respect to Azure, Google or AWS with Windows HMP 3.0 SU baseline. So I am not sure why this...
View ArticleHmp win 3.0 on Azure cloud server?
From what I understand HMP WIN 3.0 on a virtual/cloud based machine is only certified for VmWare.Is supported on Azure?I did a search and found that "VoiceGuide" specs their application (Which uses...
View ArticleRE: Need to change 24th parameter in firmware file for gc_GetFrame()
Hi,I guess we would need to know what specific board or product you are using in this case. But I did manage to see further detail in the GC ISDN Tech guide here:www.dialogic.com/.../hmp30winMore...
View ArticleEvent reporting speed?
So let me precede this by saying I think this may be an issue on HMP systems too from what I've observed. That being said...After some interoperability testing, I've noticed DM3 cards experience a...
View ArticleClik here to view.
Voice problem after install windows updates (HMP 3.0, windows server 2008 R2)
Hello! After installing the system updates of Windows Server 2008 R2, there was a problem with the operation of the Dialogic telephony boards. The server has 2 HMP 3.0 boards, 8 E1 channels. The...
View ArticleRE: HMP Linux 4.1 update 165 rejects incoming INVITE with 486 Busy Here
Hi, I instaled update 236, now i have to wait to see if it will hapen again.
View ArticleRE: Event reporting speed?
How many channels were running when you did the test? Also what boards did you use for comparison sake in this case?While you may be able to compare timing HMP to that of SR since its completely...
View ArticleRE: Event reporting speed?
I've tested this with a DM/V1200BTEPEQ and a DM/V960A-4T1 against a D/240JCTT1-EW. Most of the testing has been done with only one call, but I've put up to four calls on there while testing.I made a...
View ArticleBarge In too sensitive and cannot be managed
We are using Dialogic HMP 3.0 with windows, and having an issue with barge in sensitivity, it is too sensitive.We ran a test using the "CSPDemo.exe" application and using the following commands, we did...
View ArticleRE: Event reporting speed?
Ok, what is the SRL programming model being used in this case for event processing? Singel or multi thread app? Are you measuring the times with the same exact file played between the two tests? I...
View ArticleRE: Event reporting speed?
One note on the DM3 and JCT products. The DM3/JCT boards were sold to Sangoma Technologies on January 9, 2018. While the API interfaces are similar between DM3, JCT and HMP products, the underlying...
View ArticleNew to HMP, Transfer calls to DID. Is this possible?
Hi I am new to HMP. I just installed it on a server in development, purchased a 4 port license. I am using a Cisco cube/router, call are getting passed through the cube to the gc_basic_call...
View ArticleRE: Event reporting speed?
This is a single-threaded asynchronous application. In all cases, the file is just being passed. To be honest, no, I'm not doing any sort of measuring other than listening for audible differences in...
View ArticleRE: Event reporting speed?
Here's the results of the aforementioned tone test: transfer.sh/.../dm3_tone.wav%29.zipIn this case, both cards were given a 600 hertz/1000 millisecond tone to generate. Upon reception of a...
View ArticleRE: Event reporting speed?
Going back to your prior comment:"To be honest, no, I'm not doing any sort of measuring other than listening for audible differences in the pauses between the prompts"This is not really valid way to...
View ArticleRE: Barge In too sensitive and cannot be managed
Hi Jeff Were you seeing an issue with your own application in this case first? And then decided to use the demo for test purposes? Or did you just run the demo? I have done testing with this in the...
View ArticleRE: Voice problem after install windows updates (HMP 3.0, windows server 2008...
Did you have the application and dialogic services running while the updates were ongoing? Did you schedule a maintenance windows to shut things down (usually recommended) to guarantee less...
View ArticleRE: Voice problem after install windows updates (HMP 3.0, windows server 2008...
No, we did not close the dialogic applications and services when updating. The server has only the PSTN calls, without SIP. Incoming calls (coming on the first telephony card) have a audio
View ArticleRE: Event reporting speed?
That is true. Is the tone method any more reasonable? That should be much more easily measurable - and reproduceable.
View Article