RE: Some Win64 issues
Hi Jeff, thanks for the answer3.0 SU.393I would say that this issue #2 is definitely not fixed, 393 was fresh installed.As per the issue #1 the error might be not in that function itself cause the...
View ArticleRE: Some Win64 issues
Hi Hunter,Ok, thanks for the clarification.For #1: I know there are some tricks for UIO handling with the respect to defines need when using 32-bit vs 64-bit UIO callback functions and related...
View ArticleJCT boards and HMP 4.1
Hello,I am using SR 6.1 LIN with JCT boards on CentOS 7.1.I'm intending to mix HMP 4.1 on this:(I am new to HMP) SR6.1 HMP 4.1 PSTN...
View ArticleRE: JCT boards and HMP 4.1
The basic APIs are very similar between the SR6.1 and HMP 4.1 SDK. In terms of hardware support, if you want to retain TDM connectivity, under HMP 4.1 LIN you would need to use Dialogic Half Length...
View ArticleRE: JCT boards and HMP 4.1
Thank you Daniel!OK. My first thought is impossible.So I'm intending now to use both in the following way:JCT <-Stream read/write-> Shared memory <-Stream read/write-> HMPI try installing...
View ArticleRE: Some Win64 issues
Hi Jeff, Thanks for the answers. What should buy to get SLA for support?
View ArticleSD_ParmDtmfTalkOffFlag
Please explain the use of this flag in the HMP .config fileSetParm=0x0705,0 ! SD_ParmDtmfTalkOffFlag (0=Disable anti-talkoff,1=Enable)on sigDetThere is no documentation on this that I can find. What...
View ArticleHAIRPINNING sip rtp audio - experiencing high latency audio
When hairpinning audio (HMP3.0 SU349 - G.711@pime=20) between separate SIP calls, I am noticing approximately 100 to 200 milliseconds delay/latency in the hairpinned audio in both directions.My app...
View ArticleRE: HAIRPINNING sip rtp audio - experiencing high latency audio
Hi,I don't know about the expected latency, but I do know that the latency is indeed noticeable. We had an installation where, because os some crazy routing requirements, the calls had 4 legs in our...
View ArticleDMV1200 not working with watson modem
I have a DMV1200 PCIe that was connected to a Panasonic PBX to PRI card and was working great.Now I connect DMV1200 to a watson E1 modem.protocol is NET5 , I disabled CRC , changed user to network but...
View ArticleRE: Cannot install the HMP in the Window Server 2016
I am trying to do the same thing. I am using 387 and it installs fine. My problem is that the licensing engine cannot find the LM>Software>Dialogic folder. Someone at Dialogic must not of...
View ArticleCannot install the HMP in the Window Server 2016
Hi,I got the freeze screen when installing the HMP in the windows server 2016.I had tried different versions (387, 385, 382, 375, ...) but got the same result.
View ArticleRE: Cannot install the HMP in the Window Server 2016
I don't think this is related to the prior conversation as that was due to driver certification expired which has since then been fixed.What specific issue are you seeing and what error is being...
View ArticleRE: DMV1200 not working with watson modem
I guess the question here would be what ISDN PRI protocol variant is configured on the Watson side in this case? Such that you can match the same (if available for the DMV board).Jeff
View ArticleRE: HAIRPINNING sip rtp audio - experiencing high latency audio
Indeed an interesting question which comes up time to time. Also note there may be improvements for this in later SU as opposed to build from 5+ years ago. (349 released Jan 2014). Overall, there are a...
View ArticleRE: HAIRPINNING sip rtp audio - experiencing high latency audio
Thanks for the reply Jeff,I used wireshark for the measurement.To switch to native with no transcoding:Would it be as simple as replacing the gc_Listen(linedev_a, timeslot_b) and gc_Listen(linedev_b,...
View ArticleBUG in the setup of SU 393 for PowerMedia HMP 3.0
Hi,After installation of the last HMP 3.0 SU 393 the serious bug was found - one of the call control libraries PDKRT.DLL is absent.Below is a fragment of the RTF...
View ArticleRE: BUG in the setup of SU 393 for PowerMedia HMP 3.0
Hi Boris,The overall recommendation is to remove the reference from your application to these libraries in the gc_Start() API call. They are not intended for use by an HMP (SIP) or HMP/DNI (PSTN)...
View ArticleHow to write the program using HMP?
Any sample code or PDF, the voice_programming_hmp_v7.pdf is very difficult for rookie.
View ArticleRE: BUG in the setup of SU 393 for PowerMedia HMP 3.0
Hi Jeff,Thanks a lot for your answer. I will remove the PDKRT reference from the CCLIB_START_STRUCT list.
View Article