RE: Change RTP Port
In this case you need to preserve the configuration using the following method.This is documented in the system configuration guide:3.6 Preserving Data in User Configuration...
View ArticleRE: Dialogic HMP 4.1 On Centos 7.6 / 7.7
In this case, HMP requires at least one of the Network interface names be "ethX" where X is some number (typically 0). In VMs this is common to be named something else, and required to be changed to...
View ArticleRE: Error while starting DM IP601-2E1-PCI-100BT
i know it is an old post, but what did you do to solved it?i have the same problem
View ArticleRE: Error while starting DM IP601-2E1-PCI-100BT
hey' i know it's an old post, but how did yo solved it? we have the same problem.
View ArticleError while starting DM IP601-2E1-PCI-100BT
Hi,I have the following Dialogic board: DM/IP601-2E1-PCI-100BT (2x ISDN30 and 1x LAN). I use Dialogic System Release 5.1.1 Feature Pack 1 Service Update 136 @ Windows 2000 SP 4.I wan't to make a SIP...
View ArticleRE: Dialogic HMP 4.1 On Centos 7.6 / 7.7
Thank you for that, I changed the naming of the Network interfaces to eth0 and eth1 and now the HMP finds the interfaces successfully.RegardsColin
View ArticleD/600JCT-2E1 Power Req
Hi,Running a server 20008 R2 with D/600 card and suddenly after reboot of server i getPower Requirement was not met but the user had the power override on, for board in slot 0, bus 4, Power Required is...
View ArticleRE: dx_getxmitslot error=0x6a Invalid Switching Handler Bus Mode
Sound like the dx_getxmitslot call is getting a bad handle in this case. I know I have used that demo on HMP in the past but it was still in context of HMP with DNI (for pstn), not SIP. I know it was...
View ArticleRE: dx_getxmitslot error=0x6a Invalid Switching Handler Bus Mode
Whoa. More acronyms and history I don't have reference for.You are telling me HMP is old? What is current?You mentioned SR 6.x. Does SR = Standard Runtime Library? If so, the latest PDFs on...
View ArticleRE: dx_getxmitslot error=0x6a Invalid Switching Handler Bus Mode
No, HMP is not old, the SR 6.x (system release 6.0 PCI software) was a different older animal of which the demo you are using was meant for. Thus the name sr6callp. What I said was I don't recall if is...
View ArticleRE: dx_getxmitslot error=0x6a Invalid Switching Handler Bus Mode
so in the various demos that I have seen there are API calls with "sr_" prefix. Is that System Release or Standard Runtime that the prefix is referring to? I had been assuming Standard Runtime as...
View ArticleRE: dx_getxmitslot error=0x6a Invalid Switching Handler Bus Mode
Don't confuse the SRL API (standard runtime library) used for event processing between host library and firmware communications with that of SR (system release software) in this case.In anycase, the...
View ArticleRE: dx_getxmitslot error=0x6a Invalid Switching Handler Bus Mode
Let me talk internally here first. It sounds like I've been given an impossible task. Build a layer that allows for Sip (new stuff) and PSTN (stuff in field).
View ArticleRE: dx_getxmitslot error=0x6a Invalid Switching Handler Bus Mode
I don't think the task would be "impossible", I just think you may need some pointers to provide the background on getting you to the point of where you need to be. And that type of conversation would...
View Articledx_getxmitslot error=0x6a Invalid Switching Handler Bus Mode
I need help learning how to figure out problems as I dig into developing an HMP layer for our system. I've download several demos, worked for days to get them to compile in VS 2017, and then found...
View ArticleHMP 4.1 ipmedia start failure
Hi all,I have a strange behaviour with a new HMP 4.1 installation (SU 272). Installation completed successfully, and ipmedia starts with the standard demo license. Anyway with a permanent purchased...
View ArticleRE: HMP 4.1 ipmedia start failure
From q quick look there is a requirement from the FlexLm (licensing) level that NIC must be named EthX (where x is a number) for license activation to work correctly. I see that since this is a VM, you...
View ArticleRE: HMP 4.1 ipmedia start failure
Hi Jeff,The problem can't be this one, because on some other VMs I have ensXX interfaces and the system works.Roberto.
View ArticleRE: HMP 4.1 ipmedia start failure
I am not sure about Linux, but I know on windows HMP side the same flex version does not support teaming. So the NIC has to be on a NIC that is not part of the team. You can then use any other adapter...
View Article