ipm_Listen synchronization object timeout
Hello.Using HMP 3.0 SU361 on Windows 2008 R2.After reboot having the following issue: 05/05/2016 09:36:34.325 6060 10020 libipm_ipvsc EXCE Ipmedialib ipmB1C261...
View ArticleRE: HMP 367 + T.38 fax
Jeff, I have just checked T.38 on SU375, the T.38+IPv6 problem still persistsRavil
View ArticleHMP 367 + T.38 fax
Hello, I decided to test HMP 367 update. Everything seems to be working as usual, but one thing is broken - T.38 fax, I cannot send any fax from one HMP channel to another though with previous updates...
View ArticleDMV1200 Detects 33 voice boards instead of 30 , what are extra boards and...
I have a DMV1200 board, I get Voice Board counts with sr_getboardcnt("Voice", &BoardCount); It returns 33 voice boards , with total of 132 voice channels.as DMV1200 is 120 channel , I expect to...
View ArticleRE: DMV1200 Detects 33 voice boards instead of 30 , what are extra boards and...
Pending the mediaload you are using they are probably fax channels in this case. You can confirm by running devmapdump from DOS CMD prompt and you will see those devices have assigned fax addr.Jeff
View ArticleRE: HMP 367 + T.38 fax
Yes, that would be correct, since IPV6 support has not been added as of yet for the release. Its still a work in progress, and thus needs to be disabled on the OS level still.Jeff
View ArticleRE: DMV1200 Detects 33 voice boards instead of 30 , what are extra boards and...
Thanks Jeff,Yes I saw in devmapdump and they are Fax Channels.
View ArticleDialogic HMP Outbound Call could not transfer - Getting 403 forbidden error
Hi Friends,I am using Dialogic HMP with Avaya PBX. I am able to blind transfer the incoming call, where as i could not transfer the outbound call. I am getting 403 forbidden error. Can any body...
View ArticledecodeMsg error endless loop
Hello everyone.I'm using HMP SIP IP and hacing some weird issue.When system is not in use at all and I have avaiting incoming lines without any calls coming in... after some time (0-4 days, totally...
View ArticleRE: decodeMsg error endless loop
Was still causing high CPU load... this finally fixed in SU375
View ArticleRE: Can not take any more calls after certain number of calls
HI Pinku,Is it got resolved ? I am very eager to know that. Because we too facing this issue, and we are restarting Dialogic service.
View ArticleCan not take any more calls after certain number of calls
Hi All, To check the performance of my HMP application I have tested it with a tool to repetedly scan the channels sending INVITE Packets. After scanning so amny times I have found that it HMS is not...
View ArticleDriver Installation Failure for D/600 JCT 2E1 PCIe on HPE DL120 G9
I have a HP Server DL120 G9 (1 CPU Xeon E5-2603 1.70GHz , 16 Gig Ram ) with Windows Server 2012 R2 .After installing Dialogic D/600 JCT 2E1 PCIe on GPU riser kit , and Installing System Release 6...
View ArticleEnc(11): WARNING: Total dropped frames
Dear all,Under linux, I found it has a lot of warning message under /var/log/message as follows:[root@server]log]# grep Enc messagesSep 20 10:43:53 server ssp_x86Linux_boot: Enc(82): WARNING: Total...
View ArticleRE: Can not take any more calls after certain number of calls
Hard to say in this case as it depends on what version of HMP was used back then for this one. Its quite old trail in this case (10+ years). I suspect whatever issue you are seeing may be a different...
View ArticleRE: Driver Installation Failure for D/600 JCT 2E1 PCIe on HPE DL120 G9
Ok, well there was a bug found in HP BIOS for similar issues on HP DL Gen 9 servers with HMP /DNI boards. that was doc'ed here:www.dialogic.com/.../pm_hmp_winYou may want to try upgrading the BIOS and...
View ArticleRE: Enc(11): WARNING: Total dropped frames
HI,This means that the firmware is no able to pass audio blocks up to the Host library for processing in this case and they are being dropped. Meaning at the higher application level, something has...
View ArticleRE: Driver Installation Failure for D/600 JCT 2E1 PCIe on HPE DL120 G9
Thanks Jeff for your reply and thanks god you are here .I upgraded BIOS and ILO to latest version 2017.07.1 But no difference . The problem exists.My customer has 30 G9 servers that I should run...
View Article