RE: Driver Installation Failure for D/600 JCT 2E1 PCIe on HPE DL120 G9
Problem Solved . The reason was riser card on other PCIe slot.No other riser card should be installed on other PCIe slots.The only riser card should be one that Dialogic is installed in.It seems that...
View ArticleRE: Receive 488 Not Acceptable Here after receive Re-Invite without SDP on...
Has your problem rectified ? It would be helpful if you share the solution. Thanks,Palani
View ArticleReceive 488 Not Acceptable Here after receive Re-Invite without SDP on Avaya SES
Hello,Just wondering whether HMP will be able to handle RE-INVITE with no SDP?At the moment it seems the application send back "488 Not Acceptable Here", i was thinking it is about codec mismatch.I...
View ArticleProblems suddenly with gc_GETCALLINFO
My mature outbound calling application has suddenly developed a problem. The call is answered, but it appears the gc_GETCALLINFO function never returns with a result.Any ideas what could suddenly cause...
View ArticleRE: Call Troubleshooting
To answer your first questions it depends on the technology and protocol of which you are using in this case. As that would decipher the modules you would look to enable in RTF to get more data in this...
View ArticleRE: Call Troubleshooting
Regarding SDK, What checkboxes, I see a single 243MB download, please clarify.In regards to tracing, I use Global Call protocall and Springware boards
View ArticleRE: Call Troubleshooting
Nevermind on the checkboxes, I realized you are referring to the install page. ThanksI would still like some clarification on tracing procedures, using Global Call and Springware.
View ArticleRE: Call Troubleshooting
Yes, sorry, I was referring to one of the pages on the actual install shield script in this case.Ok, if you are using GC, what protocol are the lines themselves? Is this just T1 E&M or some other...
View ArticleCall Troubleshooting
What is the current recommended call troubleshooting methodology?Back in the day we would turn on RTF tracking. What is recommended now?And while I have your attention, my global call header files are...
View ArticleRE: Problems suddenly with gc_GETCALLINFO
For others down the road, problem turned out to be a conflict with Virus Protection SoftwareRemoved and problem went away.
View ArticleProblems again with GC_GetCallInfo
Well, the problem is back.My mature outbound calling application has developed a problem. The call is answered, but it appears the gc_GETCALLINFO function never returns with a result.What timeout...
View ArticleNo GCEV_UNBLOCKED after gc_OpenEx()
We are using Dialogic SR 6.0 Build 271 on Windows using NI2 protocol.We have an intermittent problem with our application first starts. What we see happening is that after the gc_OpenEx() call we do...
View ArticleRE: Problems again with GC_GetCallInfo
Hi,Its possible that something may not be provided from the switch side in this case. But it really depends on the protocol you are running in this case. What is being used here? Analog? Or GC with...
View ArticleRE: Problems again with GC_GetCallInfo
P_pdk_na_an_ioI'm trying to determine voice or machine answer.Is there a timeout parameter.This is an intermittent problem. One days calls go out fine, the next they do not. No changes to the system,...
View ArticleDlgcHost_Utility::SystemException
DlgcHost_Utility::SystemException issueA simple program (opening voice device and successfully playing vox file) gives “terminate called after throwing on instance of...
View ArticleRE: DlgcHost_Utility::SystemException
What specific CentOS version is this? also what SR 6.1 SU is being used in this case? The past instance where I had seen that type of exception had to do with the application running without root...
View ArticleDIALOGIC HMP 18X RESPONSE RETREIVE VALUE
Hi,I am using HMP Linux 4.1 release . When i use gc_MakeCall (SIP Technology ) when i get GCALL event (18x ) how to retirve value in the application to determine if it is 183 Session In progress or...
View ArticleRE: DIALOGIC HMP 18X RESPONSE RETREIVE VALUE
Hi,Might want to take a look at following section:4.21 Receiving Multiple SIP 18x Provisional ResponsesIn the GC IP TUG:www.dialogic.com/.../globalcall_for_ip_hmp_v12.pdfJeff
View Article