RE: gc_hmp_hold_retrieve demo project - the call is successful but the voice...
Well in this case you would go to the "capture" menu and select interfaces and pick the nic for the IP of the network used by HMP for RTP. . Jeff
View ArticleRE: Running HMP Linux with a user different than root
Hi Jeff,I changed user and group to /usr/dialogic folder (all files and all subfolder), moreover i assigned the same owner (user and group) to /etc/init.d/ct_intel and /etc/profile.d/ct_intel.sh and...
View ArticleRunning HMP Linux with a user different than root
Hi all,I'd like to know if HMP 4.1 installed on RHEL 7, can run with a user different than root. Generally, running third-party software through the root account is a key aspect for customers who are...
View ArticleDTMF bounce?
I've been having a few problems with a D/480JCT-2T1 card; for some reason, there is an unrealistically high bounce rate on DTMF detection with dx_getdig(). For example, if I tell it to receive 11...
View ArticleRE: DTMF bounce?
I figured out how to fix the problem. I'm not quite sure I understand why; but it works; if the channel is offhook (this is a B8ZS/D4 wink-start T1), the bounce issues go away entirely. Is there any...
View ArticleRE: Running HMP Linux with a user different than root
Sorry I think I misunderstood the original question. Yea, making those changes you noted will only help lower level users access those areas for purposes of application run-time sequences where that is...
View ArticleRE: Windows update
In this case, its always recommended to stop running applications and devices if performing maintenance on the system and running windows updates. I seen cases where it stops and halts operations...
View ArticleRE: KB4056892 Causes Access Denied for HMP
Just an update that Microsoft has released fixes for the issues that were affecting HMP software.Here is list of original problematic KBs and fix noted below:Windows...
View Articleafter GCEV_CONNECTED, how to send DTMF in HMP windows
Currently I have an HMP SIP application based on C++ which makes an outbound call. But Is there any way to dial an extension number or some authentication for example user id once I got GCEV_CONNECTED...
View ArticleRE: KB4056892 Causes Access Denied for HMP
KB4073291 is only for Windows 10 32bit systems and cannot be installed on 64bit systems and therefore doesn't resolve the issue.
View ArticleRE: KB4056892 Causes Access Denied for HMP
Ok, I guess thee main point overall is to run the updates check on you own server in order to get the latest fixes from Microsoft in this case. As noted in the main article for the meltdown/spectre...
View ArticleRE: Including User-Agent header on ACK during outbound call setup
Ok, in this case when using the SIP generic headers methodology to change header field in outgoing messages you need to make sure you use the current duration parameter in this case. As that will...
View ArticleIncluding User-Agent header on ACK during outbound call setup
Hello, I have a 1PCC application using HMP Windows. We are interfacing to a PBX which requires that all SIP messages generated by HMP include a User-Agent header. I set a User-Agent header using...
View ArticleDTMF in 183 Session in Progress
Hi,When somebody makes a call to HMP (linux relase ) after i send 183 Session in Progress is it possible to get DTMF before 200 OK ? After i answer the call with 200 OK it works ,but i would like to...
View ArticleRE: KB4056892 Causes Access Denied for HMP
Does this issue occur with Windows 7 Pro or Windows Server 2008R2?
View ArticleRE: KB4056892 Causes Access Denied for HMP
Hi,I can only state that on 2008 R2, applying the KB4056897 (in my case) it worked just fine with no issues as I had seen reports of the same from others. I suspect since that KB is also applicable to...
View ArticleRE: DTMF in 183 Session in Progress
I believe only in in-band dtmf sent within the RTP stream itself can be detected at the voice channel level. As usage of RFC2833 will only be set for the mediastream once the call is fully establish...
View ArticleRE: DTMF in 183 Session in Progress
Hi I read that it is possible to have 2 way rtp before 200 OK. Does HMP support this ?www.packetizer.com/.../rfc50094.2. Forward Early Media ........................................5
View ArticleRE: KB4056892 Causes Access Denied for HMP
I've confirmed on my Windows 10 x64 system that KB4074588 released on 2018/02/13 resolved the issue with DCM.
View ArticleRE: DTMF in 183 Session in Progress
Yes, we support early mediars, but I am not sure about the exact RFC. However, in this case, the restriction is that RFC2833 is not available till after the call is answered. But if the tones came...
View Article