RE: RECORD NON-CONF CALL
Ok, a couple things seems wrong in the source you provided. One thing is you don't need LCOFF as that is for analog loop current drop (boards), and suspect this is IP if you mentioned IPM channel.Guess...
View ArticleRE: RECORD NON-CONF CALL
I was a bit confused about that. My main async program under HMP Linux version 3 has run flawlessly for years. It does conferencing, IVR, outdial, etc. It uses all gc_OpenEx and scroutes, etc. So what...
View ArticleRE: RECORD NON-CONF CALL
Actually this should be able to be built into the existing application just as long as you have the resources for the extra dxxx devices needed for the transaction records in this case. Upon receipt of...
View ArticleRE: RECORD NON-CONF CALL
Thanks Jeff. I see my error. I had recording working perfectly during a two-legged conference call by listening with another dxxx device, but I thought it would work differently with a normal IVR call....
View Articledlstart HMP4.1LIN Fails
If I run conf system ipmedia start, then I can run the verification demo and the gc_basic_call_demo, however when I use dlstart, it appear that system only partially loads and the demo and...
View ArticleRE: dlstart HMP4.1LIN Fails
As you may have seen, you need to configure auto start for ipmedia portion of service in CLI using following command:conf system ipmedia start-mode auto.this way dlstart performs the complete start, as...
View ArticleRE: dlstart HMP4.1LIN Fails
Thanks Jeff. I found that digging around. I don't recall ever needing to do that on the old 3.1 rev. Thanks much for the help!
View ArticleHMP 4.1LIN udom failed cli write error from socket - Verification demo and...
Our first shot at a VMWare box. Other servers load fine. The hosts file has a correct entry of xxx.xxx.xxx.xxx hostnameHMP 4.1 LIN Centos 7 Update 1, Linux firewall off, SELinux disabled.After boot...
View ArticleConference over multiple HMP instances
Hi, We are running multiple Dialogic HMP (Build 382) services with 500 ports each on Windows server 2016, and currently developing solution to bridge (connect) media paths between servers.Will...
View ArticleRE: AFTER INSTALLING HMP 4.1 SERVER DOES NOT START
HMP wouldn't change the BIOS settings and it is interesting that you need to take out the BIOS battery to get this to work. What HMP 4.1 Service Update are using? Also do you have information on...
View ArticleAFTER INSTALLING HMP 4.1 SERVER DOES NOT START
Hello everyoneI have a strange issue on Dialogic HMP linux 4.1 . I installed Cent OS 6.6. 32 bit and it works fine .After i succesfuly install HMP i restart the server for the first time and dialogic...
View ArticleDialogic HMMP for Linux 4.1 Update 236 install on RHEL 7.5
Getting the below error while installing the Dialogic HMP for LInux 4.1 Update 236 on a RHEL 7.5 64 bit:The 32-bit libstdc++ library, required by HMP, was not found.Please correct the issue before...
View ArticleRE: Dialogic HMMP for Linux 4.1 Update 236 install on RHEL 7.5
Yes, that would be correct. You need to yum install all the 32-bit libstdc++ libs and equivalent gcc components for application development.Regards,Jeff
View ArticleRE: Conference over multiple HMP instances
Hi,I think need more detail about what exactly is entailed with bridging the calls between the servers. Is this for purposes of conferencing calls together or just hair-pinning calls to the outside...
View ArticleRE: Conference over multiple HMP instances
Hi Jeff,We have implemented call patches between two users within single server (media is patched between two users and they can maintain live conversation).With this concept, planning to connect two...
View ArticleRE: Conference over multiple HMP instances
For that type of use case, you would have to add in a third leg as a SIP call between server A and server B in order to connect those two parties together. Or maybe after that point in time, you can...
View ArticleDial +1-833-445-7444 Brother Printer Customer Support Help Number
Do you uninstall the Brother Printer Drive or you want to install it again and face some problem? Don’t get too tensed just get in touch with the Dell’s high qualified technician, so just dial the...
View ArticleJust Call D-Link Router Customer Help Support Number +1-833-445-7444
D-Link Router provides the multiple connections include the mobile devices as well at one time. D-Link Routers are not only just used in associations or company but also at home as well. Everyone needs...
View ArticleClik here to view.
Issue with HMP SU 382
We are attempting to use the latest HMP SU 382 but cannot get past gc_Start with any of the multiple targets. We have a good valid license and have tried reapplying the license/and restoring defaults...
View ArticleCall Quality and Latency
Hello All,Trying to see if someone can point me in the right direction with an issue I'm having. We are currently experiencing issues with call quality and latency when we have 15 concurrent calls...
View Article