Set User-Agent header on REGISTER message generated by HMP WIN
Hello, I have a 1PCC application using HMP Windows. We are interfacing to a PBX which requires that the REGISTER request generated by HMP include a User-Agent header.I can set a User-Agent header on...
View ArticleRE: Detect if Board is DM3 or JCT ?
I would check dx_getctinfo in this case in order to determine if voice channel is off a DM3 vs. JCT board. Refer to Voice API reference for more information:www.dialogic.com/.../voice_api_v2.pdfJeff
View ArticleError Diagnostic D/120 JCT
Hi,we have a system with 2 Dialogic D/120JCT-LS-Rev 2 installed.the boards were working fine, but suddenly one of them stopped to work. If i disable the board1 from the DCM, the Dialogic System service...
View ArticleRE: Error Diagnostic D/120 JCT
I think in this case it sounds like the board might be having a HW (hardware) type issue right now. How old is the board? You may want to think about sending it in for RMA if still under warranty. See...
View ArticleRE: Inbound SIP Call with Delayed Offer in 3PCC Mode
I have the same problem but I do not get the GCEV_ANSWERED event before ack
View ArticleInbound SIP Call with Delayed Offer in 3PCC Mode
Hello,I am implementing a sample UAS application which handles inbound SIP calls in 3PCC mode using HMP 4.1 on RHEL 6.Everything works as expected when UAC sends an SDP offer in the SIP INVITE message....
View ArticleRE: Error Diagnostic D/120 JCT
Hi Jeff,so you think that is a HW issue and it can not be fixed by us right?The board is quite old and is also PCI-X connector format, which i guess are not being manufactured anymore. I am almost sure...
View ArticleSR 6.0/271 and the C++ 2005 Redistributables
SR 6.0/271 installs the Microsoft Visual C++ 2005 Redistributable and the driver appears to be dependent on their presence. The C++ 2005 Redistributable is no longer supported by Microsoft and this...
View ArticleRE: SR 6.0/271 and the C++ 2005 Redistributables
At the current time, there are no plans to upgrade the Microsoft level runtime package on the SR 6.x baseline. Right now the release is in sustaining mode only and all are encouraged to make the port...
View ArticleRE: Inbound SIP Call with Delayed Offer in 3PCC Mode
I suspect in this case, if there is no Answer event then most likely something happen in the processing of the SIP ACK message (maybe parse error) in this case at the stack level. You would have to...
View ArticleRE: Inbound SIP Call with Delayed Offer in 3PCC Mode
Thanks Jeff. Actually I was wrong, the SDP is received in the GCEV_ACCEPT_MODIFY as it is a response to a re-invite. The issue is resolved.
View ArticleClik here to view.
HMP starts, but no audio on first call, and then can't be restarted in DCM
Hi, I'm having a periodic issue with HMP 3.0 build 372 on Windows 8.My HMP app will start correctly, and be able to open all line devices and voice resources and do a gc_WaitCall(). However, after...
View ArticleRE: HMP starts, but no audio on first call, and then can't be restarted in DCM
Hi There,Do the dm3nk and dm3config errors happen on dialogic services startup? even though it state services started? Need to know the exact time period of which these occur in respect to when the...
View ArticleRE: IPMS vs XMS
Hi Arun,This is the GlobalCall and R4 APIs forum. You'll probably have more luck with this question in the XMS forum: www.dialogic.com/.../61.aspx, greg
View ArticleIPMS vs XMS
Hi,Can anyone tell the difference between IPMS and XMS and the problem of using IPMS.. ?Thanks in advance.Regards,Arun
View ArticleClik here to view.
RE: HMP starts, but no audio on first call, and then can't be restarted in DCM
Hi Jeff,Was able to re-create the issue this morning. Here's the timeline of what happens:8:23 Cold bootBoard appears as started in DCM. Rtf logs some "Client detached" messages. dlgc_log logs some...
View ArticleDialogic JCT Series Board Install Problems
Hello,I am having trouble installing Dialogic JCT boards on a windows 2008 server. There are two PCI-e boards , both connected with using a CTI Bus Cable.When installing the software, i receive a few...
View ArticleRE: Dialogic JCT Series Board Install Problems
I suspect it might be related to this technote for power budgeting jumpers:www.dialogic.com/.../jctAlso if this is 32-bit, make sure PAE is disabled on the system.www.dialogic.com/.../jctRegards,Jeff
View ArticleRE: Dialogic JCT Series Board Install Problems
thanks.Have checked the power budget jumpers and were correctly assigned.the server is 64-bit.anything else we can try? i dont think the boards are faulty as this is a first time use for both.
View Articleno voice heard over the line channel ch=ipmB1C1 ErrorCode=0x5a04 -Out of...
Hi Team,I wrote a SIP interface using HMP4.1 API to play a vox file. However, no voice is heard after the call was connected and answered. I checked the rtflog file and found below error was logged...
View Article